Are you tired of seeing rust on your lawn mower? Rust can cause your lawn mower to become ineffective, decrease its lifespan and make it look unsightly. However, you don’t have to buy a new lawn mower to solve this problem. There are several DIY rust removal techniques that can help to remove rust from your lawn mower and extend its lifespan.

Why Does Rust Form on Lawn Mowers?

Rust is a common problem with lawn mowers, especially if they are exposed to moisture. The metal parts of the lawn mower can easily become rusty if they are not properly maintained. Rust can also occur if the paint on the lawn mower gets chipped or scratched.

DIY Rust Removal Techniques for Your Lawn Mower

Here are some effective DIY rust removal techniques for your lawn mower:

1. Vinegar

Vinegar is an effective rust removal solution. Soak a cloth in vinegar and use it to wipe the rusted parts of the lawn mower. Allow the vinegar to sit for 10 to 15 minutes, then use a brush or scouring pad to scrub the rust off. Rinse the area with water and dry it thoroughly.

2. Baking Soda

Baking soda is another effective rust removal solution. Mix baking soda and water to create a paste. Apply the paste to the rusted parts of the lawn mower and let it sit for 10 to 15 minutes. Scrub the rusted parts with a brush or scouring pad, then rinse with water and dry the area thoroughly.

3. Coca-Cola

Coca-Cola can also be used to remove rust from a lawn mower. Soak a cloth in Coca-Cola and use it to wipe the rusted parts of the lawn mower. Let it sit for a few minutes, then scrub the rust off with a brush or scouring pad. Rinse with water and dry the area thoroughly.

4. Naval Jelly

Naval jelly is a rust removal solution that is specifically designed to remove rust from metal surfaces. Apply the naval jelly to the rusted parts of the lawn mower and let it sit for the recommended time. Use a brush or scouring pad to scrub the rust off, then rinse with water and dry the area thoroughly.

5. Sandpaper

If the rust on your lawn mower is not too severe, sandpaper can be an effective solution. Use a fine-grit sandpaper to sand the rusted parts of the lawn mower until the rust is removed. Wipe the area with a clean cloth to remove any debris and then apply a rust-inhibiting spray to prevent further rusting.

Preventing Rust on Your Lawn Mower

Prevention is always better than cure. Here are some tips to prevent rust from forming on your lawn mower:

1. Keep Your Lawn Mower Dry

Moisture is the enemy of metal surfaces. Keep your lawn mower in a dry place to prevent moisture from forming on the metal parts.

2. Clean Your Lawn Mower Regularly

Clean your lawn mower regularly to prevent dirt and debris from accumulating on the metal surfaces. Use a dry cloth to wipe down the metal surfaces after use.

3. Apply Rust-Inhibiting Spray

Apply a rust-in hibiting spray to the metal parts of your lawn mower after cleaning it. This will help to prevent rust from forming on the metal surfaces.

4. Touch Up Chipped or Scratched Paint

Chipped or scratched paint can expose the metal surfaces of your lawn mower to moisture, which can cause rust to form. Touch up any chipped or scratched paint on your lawn mower as soon as you notice it.

Final Words

Rust can be a frustrating problem for lawn mower owners, but there are several DIY rust removal techniques that can help to remove rust from your lawn mower and extend its lifespan. Remember to also take preventive measures to prevent rust from forming on your lawn mower in the first place.

• Vinegar
• Baking soda
• Coca-Cola
• Naval jelly
• Sandpaper

By following these tips, you can keep your lawn mower rust-free and in good condition for years to come.